I had been toying with the idea of fitting up the 2010 front end on our 08 chassis. This would make it a first as far as i know and i really like the look of the '10 front end. We bought a used front end and started fitting it up. The hood and back portion of the fenders bolt on, however everything in front of the wheels needed to be fabricated.
Step 1: Cut out the oem core support...
Step 2: start making our own core support!...
next would be finishing the core support, which is really just 2 uprights down to the frame rails. Then make some headlight brackets and figure out bumper mounting also.
|
